AutoLink II OBD Distance Sensor

The AutoLink II OBD Distance Sensor is the biggest revolution in external distance sensor technology in the past 10 years. Its simple plug and play installation makes installing a RAC Plus I Distance Measuring Instrument the easiest it has ever been.

Installs in 30 Seconds - No Tools Required - No Cable Splicing - No Installation Costs

How It Works

All vehicles since 1996 have been made with an On Board Diagnostic (OBD plug that provides detailed information about the inner working of the vehicle. This plug, usually located within a foot or two of the steering wheel, allows a variety of devices to monitor the status of the vehicle while it is running.

By connecting to this plug, the AutoLink II sensor is able to determine when the vehicle is moving and send that information to the RAC distance measuring instrument, allowing it to keep track of the distance you have travelled as you drive.

Installs in 30 Seconds - No Tools Required

You plug the AutoLink II into the OBD interface on your vehicle, then plug the AutoLink II into your RAC's power port using the provided telephone-style cable. That's it. No getting under the hood, no splicing wires, no tools required.

How accurate is it?

Under ideal conditions, the AutoLink II is accurate to 1 foot within a thousand.

What are its limitations?

The vehicle's OBD signal is generally not available at speeds below 1 mph. If you will be travelling at a 'creeping' speed below 1 mph, or will have frequent starts and stops over a long course length, we don't recommend using the AutoLink II. In these cases, the Modular or Magnetic Sensor would better suit your needs. The AutoLink II is also not recommended for use with any brand of DMI other than JAMAR's RAC, and is not recommended for any pre-2006 vehicles.

How is the AutoLink II different than the original AutoLink?

The original AutoLink would draw power from the vehicle's battery even if the RAC was turned off, which meant it had to be disconnected from the OBD port when not in use. The new AutoLink II senses when the RAC is turned on and off and turns itself on and off as needed. It does not have to be disconnected from the OBD port when not in use.

Protected by US Patent Number 8,447,464

AutoLink II OBD Distance Sensor

 

Includes AutoLink II Sensor and RAC connection cable.

Works with all RAC Plus distance measuring instruments, as well the older RAC-100 and 200.

 

Part #: NL-OBD2

Price : $444.00

In Stock? Yes

Support Info

JAMAR Technologies, Inc. 1500 Industry Rd, Suite C, Hatfield, PA 19440

 

Phone: 215-361-2244     Fax: 215-361-2267     E-Mail: mail@jamartech.com