You are here: Home > Support > Hardware Support > IMC-IV & IMC-4
Hardware Support
IMC-IV & IMC-4
These units were the original hand-held data collectors developed and sold by JAMAR in the 1980s. The current
generation of these devices is the TDC Ultra.
These units are obsolete and are no longer repaired or supported.
IMC-IV & IMC-4
These units were the original hand-held data collectors developed and sold by JAMAR in the 1980s. The current
generation of these devices is the TDC Ultra.
These units are obsolete and are no longer repaired or supported.
Frequently Asked Questions
What programs can the IMC-4/IMC-IV be downloaded to?
The IMC-4/IMC-IV can be download to the IMC, PETRA DOS, PETRA for Windows and PETRAPro programs. Note that the baud rate for the download of the IMC-4 must be set to
1200 in the software.
Why won't my IMC-IV download to the software?
There are several possible reasons why the IMC-IV may not download to the software.
1. You must use a standard JAMAR universal cable, with IMC adapter, for the download to work correctly. The IMC-IV has a custom configured output and will not work with a
standard serial cable.
2. The baud rate used for the download must be set the same in the IMC-IV as in the software. Note that the baud rate used for the IMC-4 download is hard wired at 1200. To set
the baud rate in the IMC-IV, tab to Dump, then press the Do key. Next, tab to Baud, press the Do key and select the proper baud rate.
3. There may be a conflict with how your software is configured. Check the Software Support page for more details on your specific program.
What programs can the IMC-4/IMC-IV be downloaded to?
The IMC-4/IMC-IV can be download to the IMC, PETRA DOS, PETRA for Windows and PETRAPro programs. Note that the baud rate for the download of the IMC-4 must be set to
1200 in the software.
Why won't my IMC-IV download to the software?
There are several possible reasons why the IMC-IV may not download to the software.
1. You must use a standard JAMAR universal cable, with IMC adapter, for the download to work correctly. The IMC-IV has a custom configured output and will not work with a
standard serial cable.
2. The baud rate used for the download must be set the same in the IMC-IV as in the software. Note that the baud rate used for the IMC-4 download is hard wired at 1200. To set
the baud rate in the IMC-IV, tab to Dump, then press the Do key. Next, tab to Baud, press the Do key and select the proper baud rate.
3. There may be a conflict with how your software is configured. Check the Software Support page for more details on your specific program.
 | |  | |  | |  | |  | |  | |  |
| Making Data Collection Easier |
