Modular Distance Sensor & Vehicle Installation Kit
Available only from JAMAR, the Modular Distance Sensor & Vehicle Installation Kit
provides the best combination of installation ease and accuracy.
Extremely Accurate Measurements - The electronic speed signal in all newer
vehicles is an extremely low level signal at low speeds. In fact, many speedometers
don’t register under 2-4 MPH. That’s really not a problem for normal vehicle operation
but, a BIG problem if you must use their low level speed signals for measuring distance.
While most other Electronic Sensors will detect low level signal down to only 60-30
millivolts, the JAMAR Modular Distance Sensor will detect down to a 10 millivolt signal,
thereby providing much more accurate distance measurements.
Reliable - All other manufacturers’ sensors are designed to be installed in a very unfriendly environment... under the vehicle’s hood. High temperatures
and exposure of wiring to moisture create unnecessary failures and down time for the customer. The JAMAR Modular Distance Sensor is designed to be
located inside the vehicle, typically under the dashboard, which not only allows for a cleaner installation but also places the MDS in a much more friendly
environment.
Modular Design - Simple installations are achieved by using three (3) plug-in connectors: one to the DMI, one to 12 volts/ground and one to the
vehicle speed sensor (VSS). Not only is the installation quick, it is cleaner than having to work in the vehicle's engine compartment.
Self-Diagnostics - Only JAMAR Modular Distance Sensors have a SENSOR TEST button to verify that the sensor is functioning properly. In addition, a
built-in TAP TEST feature allows you to easily verify that the DMI power signal cable, and the DMI itself, are working properly. These simple tests could
save a great deal of time, and you don’t even have to raise the hood to perform them.
Note: The Modular Distance Sensor is not compatible with the 2010 F-150 or 2005 and later Nissan Pathfinders.
Available only from JAMAR, the Modular Distance Sensor & Vehicle Installation Kit
provides the best combination of installation ease and accuracy.
Extremely Accurate Measurements - The electronic speed signal in all newer
vehicles is an extremely low level signal at low speeds. In fact, many speedometers
don’t register under 2-4 MPH. That’s really not a problem for normal vehicle operation
but, a BIG problem if you must use their low level speed signals for measuring distance.
While most other Electronic Sensors will detect low level signal down to only 60-30
millivolts, the JAMAR Modular Distance Sensor will detect down to a 10 millivolt signal,
thereby providing much more accurate distance measurements.
Reliable - All other manufacturers’ sensors are designed to be installed in a very unfriendly environment... under the vehicle’s hood. High temperatures
and exposure of wiring to moisture create unnecessary failures and down time for the customer. The JAMAR Modular Distance Sensor is designed to be
located inside the vehicle, typically under the dashboard, which not only allows for a cleaner installation but also places the MDS in a much more friendly
environment.
Modular Design - Simple installations are achieved by using three (3) plug-in connectors: one to the DMI, one to 12 volts/ground and one to the
vehicle speed sensor (VSS). Not only is the installation quick, it is cleaner than having to work in the vehicle's engine compartment.
Self-Diagnostics - Only JAMAR Modular Distance Sensors have a SENSOR TEST button to verify that the sensor is functioning properly. In addition, a
built-in TAP TEST feature allows you to easily verify that the DMI power signal cable, and the DMI itself, are working properly. These simple tests could
save a great deal of time, and you don’t even have to raise the hood to perform them.
Note: The Modular Distance Sensor is not compatible with the 2010 F-150 or 2005 and later Nissan Pathfinders.
You are here: Home > Products > Accessories > Modular Distance Sensor & Installation Kit
Modular Distance Sensor with Vehicle Installation Kit
Includes modular distance sensor and all cables needed to install it in vehicle. Works with RAC-100, RAC-200, and all
RAC Plus distance measuring instruments, as well as other brands.
Includes modular distance sensor and all cables needed to install it in vehicle. Works with RAC-100, RAC-200, and all
RAC Plus distance measuring instruments, as well as other brands.
Part #: RAC-MSVK-K In Stock? Yes Price : $195.00
Modular Distance Sensor Only
Vehicle Installation Kit not included. Typically ordered when vehicle installation wiring is already in place and just sensor
is being replaced.
Vehicle Installation Kit not included. Typically ordered when vehicle installation wiring is already in place and just sensor
is being replaced.
Part #: RAC-MS-K Price : $160.00
Vehicle Installation Kit Only - For Modular Sensor
Modular Sensor not included. Typically ordered when an existing modular distance sensor is being installed in a new
vehicle. For use only with a Modular Distance Sensor.
Modular Sensor not included. Typically ordered when an existing modular distance sensor is being installed in a new
vehicle. For use only with a Modular Distance Sensor.
Part #: RAC-MVK-K Price : $ 45.00
| Questions? Contact us and our sales staff will be happy to assist you. |
On-line ordering through this site is only available to customers in the United States. Prices listed are only for US customers. Pricing will vary for customers outside the US, based on import\export
fees, distributor costs, etc. If you are outside the United States, please contact your JAMAR sales representative for pricing and ordering information, or request a quote through this web site.
fees, distributor costs, etc. If you are outside the United States, please contact your JAMAR sales representative for pricing and ordering information, or request a quote through this web site.
 | |  | |  | |  | |  | |  | |  |
| Making Data Collection Easier |
*During checkout, please include the vehicle year, make and model the Sensor will be installed in.
*During checkout, please include the vehicle year, make and model the Sensor will be installed in.
*During checkout, please include the vehicle year, make and model the Sensor will be installed in.