| Hardware Support - RoadRAMP Mini Twin BYPASS Installation & Layouts |
Installing RoadRAMP Mini Twin BYPASS Sensors
Volume Only - L1
If you are recording only volume data, we recommend selecting
the L1 layout in the TRAX. This will give you a volume count for
lane 1 on tube A and a separate volume count for lane 2 on tube
B. Refer to the diagram for setup information.
If you are recording only volume data, we recommend selecting
the L1 layout in the TRAX. This will give you a volume count for
lane 1 on tube A and a separate volume count for lane 2 on tube
B. Refer to the diagram for setup information.
Speed/Class Data with Volume - L10
If you are recording only volume data, we recoomend
selecting the L10 layout in the TRAX. This will give you a
lane 1 data on the A and B tubes, with lane 2 data on the C
and D tubes. Refer to the diagram for setup information.
If you are recording only volume data, we recoomend
selecting the L10 layout in the TRAX. This will give you a
lane 1 data on the A and B tubes, with lane 2 data on the C
and D tubes. Refer to the diagram for setup information.
MTB
You are here: Home > Products > Accessories & Supplies > RoadRAMP > Mini Twin BYPASS > Installation
Install one Mini Twin Bypass sensor across both lanes.